Multi-Channel Amplifiers

archivnye_tovary
1250_MKII-Rack_Mount_Amplifiers_Top_Shot

Multi-Channel Amplifiers

  • Универсальный многоканальный усилитель с высокой производительностью
  • Возможность подключить 12 моно каналов, 6 стереопар или комбинировать вместе стерео, моно и мостовой тип подключения
  • Наличие «ушей» для крепления в серверную стойку
  • Работа от сети в 220В
1250_MKII_Amps_Hero


SONAMP 875D SE MKII

875_070322

SONAMP 1230

1230_070357

SONAMP 1250 MKII

1250_070327

Number Of Channels

8 12 12
Power Output All Channels Driven65 watts RMS per channel (X8) @ 8 ohms 120 watts RMS per channel (X8) @ 4 ohms30 watts RMS per channel (x 12) @ 8 ohms 45 watts RMS per channel (x 12) @ 4 ohms50 watts RMS per channel (x 12) @ 8 ohms 75 watts RMS per channel (x 12) @ 4 ohms
Power Output (Bridged)250 watts per channel (x 4) @ 8 ohms60 watts per channel (x 6) @ 8 ohms100 watts per channel (x 6) @ 8 ohms
Total Harmonic Distortion0.10% (1kHz, 8 ohms) 0.25% (1kHz, 4 ohms)<0.01% (20Hz-20kHz @ 8 ohms 30 WRMS) <0.25% (20Hz-20kHz @ 4 ohms 45 WRMS)<0.03% (20Hz-20kHz @ 8 ohms 50 watts) <0.06% (20Hz-20kHz @ 4 ohms 75 watts) <0.01% (1kHz @ 8 ohms 50 watts) <0.01% (1kHz @ 4 ohms; 75 watts)
Signal To Noise Ratio-96dB (w/22kHz A-WTG filter)100dB below rated output (A-weighted)100dB below rated output (A-weighted)
Input Sensitivity1.0V for 65 watts RMS @ 8 ohms 850mV w/BBE ON (+3dB) 650mV w/BBE ON (+6dB)700mV for 30 watts RMS @ 8 ohms700mV for 50 watts RMS @ 8 ohms
Input Impedance10k ohms20k ohms20k ohms
Power Consumption1,200 watts maximum (4 ohms, full power)1400 watts maximum (4 ohms, full power) 16 watts idle (no signal)1800 watts maximum (4 ohms, full power) 10 watts idle (no signal)
Heat Output288 BTU/HR @ 8 ohms (rock music) 553 BTU/HR @ 4ohms (rock music)2732 BTU/HR (full power)2868 BTU/HR (full power)
AC Fuse 120V10A (T10AL ~ 250V)10A (F10AL ~ 250V)10A (T10AH ~ 250V)
Rack Space Requirement2U3U5U
Dimensions (WxHxD)16 1/2″ x 4″ x 17 1/4″ (419mm x 102mm x 438mm)16 3/4in x 5 3/4in x 15 3/8in (425mm x 146mm x 391mm)16 3/4in x 9 1/2in x 16 1/2in (425mm x 241mm x 420mm)
RMF Dimensions (WxHxD)19″ x 3 1/2″ x 17 1/4″ (483mm x 98mm x 438mm)19″ x 5 1/4″ x 15 3/8″ (483mm x 133mm x 391mm)19″ x 8 3/4″ x 16 1/2″ (483mm x 222mm x 420mm)
Shipping Weight24 lbs (10.9kg) each38 lbs (17kg) each55 lbs (25kg) each

1250MKII

Accessories

Amp_Rack_Ears_070328

RACK MOUNT EAR KIT

Related Products




Downloads

SONAMP Brochure
SONAMP 875 D SE MKII Product Sheet
SONAMP 875 D SE MKII Manual
SONAMP 875 D MKII Control Module — Crestron
SONAMP 875 D MKII Control Module — AMX
SONAMP 1230 Manual
SONAMP 1250 MKII Instruction Manual
Technical Note — Sonamp Fuses Fall 2009
Technical Note — 1250MKII Voltage Trigger